![Tail Mold 4.75" Hammer XL Tail Mold 4.75" Hammer XL](https://cdn11.bigcommerce.com/s-o8km0e/images/stencil/500x659/products/231/576/XL_TAIL_MOLD__72587.1570030700.jpg?c=2)
Product Details
Tail Cutter for cutting tube Tails
Tail Cutter for cutting tube Tails
21 Reviews Hide Reviews Show Reviews
-
Tail cutter
Easy to use. Works great. Use a dead blow mallet and cutting board tails come out great.
-
Very good cutter
This is nice design/idea. I can cut my tubes fast and safely. I have not ever pounder the top with a hammer or anything I just put a little extra weight on it. I have a sewing cutting mat under it since I never worry about cutting anything but my tube
-
Tail cutter
Once tube has cured one hit wtth cutter then slide the tool out of tube works great for me
-
A+ tail cutter
I've been making hand dipped tubes for more than 20 years and this is my favorite hand cutter for small runs. A+ on quality.
-
Cutter
Needs to be full cured or the will get plugged up
-
Works like a charm
I have no experience cutting tubes before this purchase. This cutter works as described.
-
Tube cutter
Easy to use. Cuts great
-
Tube cutter
this cutter works pretty well. I would recommend using a 2.5lbs sand hammer with it. I tried a smaller one and worked harder to get it cut. One of the things I like about it is the blades are lined up and not staggered. it cut the tails welll.
-
Tail Cutter
Works well!
Reviews
21 Reviews Hide Reviews Show Reviews
-
Tail cutter
Easy to use. Works great. Use a dead blow mallet and cutting board tails come out great.
-
Very good cutter
This is nice design/idea. I can cut my tubes fast and safely. I have not ever pounder the top with a hammer or anything I just put a little extra weight on it. I have a sewing cutting mat under it since I never worry about cutting anything but my tube
-
Tail cutter
Once tube has cured one hit wtth cutter then slide the tool out of tube works great for me
-
A+ tail cutter
I've been making hand dipped tubes for more than 20 years and this is my favorite hand cutter for small runs. A+ on quality.
-
Cutter
Needs to be full cured or the will get plugged up
-
Works like a charm
I have no experience cutting tubes before this purchase. This cutter works as described.
-
Tube cutter
Easy to use. Cuts great
-
Tube cutter
this cutter works pretty well. I would recommend using a 2.5lbs sand hammer with it. I tried a smaller one and worked harder to get it cut. One of the things I like about it is the blades are lined up and not staggered. it cut the tails welll.
-
Tail Cutter
Works well!